I believe that most people now contract out decoration companies to carry out decoration after buying a house. So, do you know what matters need to be paid attention to when inspecting and accepting a house? So let’s take a look at what are the things to note during house decoration acceptance inspection today!
What are the precautions for house decoration acceptance?
1. Acceptance of house information
This is also the most important step. When we accept the house, we also need to check whether the information of the house is consistent with the contract, such as the actual usable area of the house, orientation and common area, and the general floor height of the house. About 2.65 meters.
When accepting a house, you also need to check the information of the house, such as whether the house quality guarantee certificate, completion acceptance form and other information are complete and standardized.
2. Acceptance of walls and floors
When inspecting the wall, we can use a small hammer to gently tap the wall to check whether there is any hollowing on the wall. Then we can use a special ruler to level the wall. We also need to carefully observe whether there are cracks on the wall. For issues such as whether there will be water seepage on the wall, we can check the wall of the house the day after the heavy rain. If there is water seepage, it can be easily seen.
If there are various problems with the wall, we can use chalk to mark the wall. For ground acceptance, we mainly level the ground. If the ground difference is about 2cm, it is normal.
3. Acceptance of doors and windows
When we accept doors and windows, we need to check whether the doors and windows are firmly installed, whether there are scratches, missing accessories, etc., whether their sealing strips are intact, and whether there is a level difference between the inside and outside of the balcony door.
4. Acceptance of waterproofing
The main inspection is the waterproofing project of the kitchen and bathroom. Unless the developer declares in advance that no waterproofing is done, we need to conduct a waterproofing test first. We can make a threshold at the door of the kitchen and bathroom, block the drain outlet, and then put About 2cm of water, after 24 hours we can go to the owner's house downstairs to check whether there is water leakage from the kitchen and bathroom ceilings.
5. Acceptance pipeline
The method for inspecting and accepting pipes is relatively simple. We can fill a basin with water and pour it into the drainage pipe or sewage pipe. This is to prevent cement and other residues from remaining in the water pipe and causing drainage difficulties.
6. Acceptance of water voltage
When we inspect the house, we also need to inspect the voltage, water pressure, etc. We can ask professionals to inspect it to prevent low water flow in the future.
After reading the above article about What are the precautions for house decoration acceptance, you will know how to inspect the house next time. The above is the content shared today. I hope you can help you. It helps!
