It’s time for daily sharing again. Today our sharing topic is to learn about the process of beautifying ceramic tiles! I believe you are familiar with the decoration topic of beautiful ceramic tile joints, because most owners will ask about this topic when decorating their houses.
1. Tools needed for ceramic tile joints
Tile caulking materials, empty glue bucket, glue gun, textured paper, caulking knife, spatula, vacuum cleaner, brush, bedding bag (to protect finished furniture and floors), and disposable gloves.
2. The process of beautiful ceramic tile joints
1. Measure the length of the ceramic tile gap to facilitate calculation of the required amount of material;
2. Clean the gaps and make them clean and dust-free. (Users who have used caulking agent please ask for a depth of 2 mm or more. The side seams on both sides of the tiles must be cleaned. If the gaps are too large, please use caulking agent to fill them. Leave Good or above depth)
3. Use a brush and vacuum cleaner to suck up the cleaned dust to ensure dust-free construction of ceramic tile joints
4. Paste special textured paper on both sides of the gap to ensure consistent standards. (Be careful not to stick the textured paper into the gap)
5. Prepare construction materials and tools (ceramic mud, empty glue bucket, glue gun, spatula, etc.)
6. Take out some AB, mix it separately first, then put it together and mix it thoroughly. The mixing time is three minutes. Make sure the materials are mixed evenly. You can use a scraper or pour a hose for construction. (Novices can fill 1/3 of the glue bucket at a time)
7. Pour the material evenly along the gaps between the tiles
8. Use a spatula to smooth out the material in the gap
9. Tear off the textured paper (be careful not to drop excess material on the floor, and tear off the textured paper in time)
10. Clean the construction site. Do not step on or wet the materials before they are completely dry (finished products need to be protected before construction)
3. Advantages of beautiful seams on ceramic tiles
1. Beautiful
The decorative effect is particularly strong after the ceramic tiles are seamed.
2. Practical
If you don’t use seaming agentThe gaps between ceramic tiles are easy to become dirty, black, and breed bacteria. However, these problems can be avoided after using a seam sealer; and it is much more convenient to clean.
3. Durable
After the ceramic tiles are seamed, they are waterproof, moisture-proof, and anti-penetration, which can truly make the ceramic tile seams "never turn black."
4. Environmental protection
The materials used are advanced, non-toxic, odorless, and do not contain benzene, toluene, xylene and other harmful ingredients.
After reading the above article about The process of beautiful ceramic tile seams, do you have a more detailed understanding of the process of beautiful ceramic tile seams? There must be a detailed answer. Well, that’s it for today’s content sharing. I hope it can be helpful to you! Slip, slip, slip! ! !
