When decorating a house, most of them use tile adhesive as an adhesive. Therefore, during the decoration, the decorator will inevitably ask the owner to help buy some tools and materials. So tile adhesive is one of the most common decoration materials. 1. So, What should you pay attention to when buying ceramic tile adhesive? Let’s take a look together!
First of all, it is necessary for us to understand what tile adhesive is, and then talk about some tips for purchasing tile adhesive!
1. What is tile adhesive?
Tile adhesive, also known as ceramic tile adhesive or adhesive, viscose mud and other names, is a new material for modern decoration, replacing traditional cement yellow sand. The adhesive force is several times that of cement mortar. It can effectively paste large ceramic tiles and stones to avoid the risk of bricks falling off.
It has good flexibility and can prevent hollowing in production. Mainly used for pasting ceramic tiles, tiles, floor tiles and other decorative materials, widely used in interior and exterior walls, floors, bathrooms, kitchens and other building decoration places.
2. What are the purchasing tips for tile adhesive?
1. Look at the water absorption rate
Choose tile adhesive with low water absorption, because lower water absorption is more suitable for areas with heavy moisture content, such as kitchens and bathrooms. Black spots will not occur after using tile adhesive. Secondly, you can also scratch the tile adhesive on the floor. If the tile adhesive is poor, it will look like chalk wherever it is scratched, and scratches will occur wherever it is scratched.
2. Check whether the rubber powder is uniform
Good tile adhesive is made through advanced equipment and scientific proportions. In addition, the viscosity after stirring should also be observed, and the mixture should be prepared strictly according to the product ratio. After stirring, the viscosity should also be observed to see whether it is a uniform thick slurry.
3. Touch it with your hands to see if it is delicate
When purchasing tile adhesive, you can also touch it with your hands. In some construction sites, the construction method of tile adhesive is used in batches. This method will cause the builder's hands to be sore after being scraped for a long time, and the quality will be affected.A well-measured tile adhesive is more delicate and smooth, which not only saves time, but also saves effort.
4. Check the water retention effect
When purchasing ceramic tile adhesive, you should also consider its water retention. If the water retention effect is not good, the strength of the ceramic tile will be insufficient and it will easily cause degumming after construction.
3. What issues should you pay attention to when purchasing ceramic tile adhesive?
1. When purchasing tile adhesive, be sure to measure whether the drying speed matches the bonding process
The general manual bonding process has a slow drying speed and requires a long initial drying time; while the machine bonding process is very fast and requires a short initial drying time. As for the thorough drying time, in most cases the faster the better so that the next process can be entered as soon as possible.
2. When choosing tile adhesive, pay attention to the viscosity of the tile adhesive after stirring
Add water according to the product ratio requirements, stir thoroughly and observe the consistency of the tile adhesive. Ceramic tile adhesive contains various functional additives, which can strengthen the adhesive force of tile adhesive, so the tile adhesive after sufficient mixing becomes a uniform and thick slurry.
After reading the content about Tile Adhesive, I believe you will have a more detailed understanding of it, so that you will be more comfortable when buying tile adhesive. The above is the content that the editor has shared with you What you need to pay attention to when buying tile adhesive. I hope it can be helpful to you. Come on!
